|
Designing On The Edge:
-
Drop Point adds dimension, mass
and attention to detail when viewed from any angle. Unique designs are
encouraged
-
Combine with 2" CONTURA for use
along the straight edges of wave ceilings
-
The strong, crisp reliability of
extruded aluminum in colors that coordinate with any suspension system
-
Factory welded corners with 12"
legs
-
Fully integrated with acoustical
and drywall ceiling systems
Green by Design:
-
66% Recycled Aluminum
-
33% Post Consumer Content
-
33% Post Industrial Content
-
2 LEED®1Credits  - 4.1 & 4.2
-
No Hazardous Waste
-
No VOC’s
-
No Heavy Metals
Materials:
-
Aluminum Extrusion: 6063 per ASTM B 221 and ASTM B 221
Metric
-
TC-2 Hanging & T-Bar Connector Clip
-
CONTURA Splice Plate with Set Screws
Fabrication:
-
6" and 8" widths x 2" high x 12' length. Custom lengths
and widths are available.
-
10' standard taping fin length.
-
Welded end caps and welded corners
Finishes:
-
Acrylic Paint
-
Powder Coat
-
ACROGUARD®
-
Kynar® 2
|
|
|
 |
Knife Edge |
|
Part # |
A |
B |
|
Drop Point 6" |
6" |
2-3/16" |
|
Custom edge trim... used to create a 6" wide picture
frame...
|
|
|
|
 |
Knife Edge |
|
Part # |
A |
B |
|
Drop Point 8" |
8" |
2-3/16" |
|
Custom edge trim... used to create a 8" wide picture
frame...
|
Top
Drop Point Details
Top
1 LEED® is a registered trademark of U.S.
Green Building Council
2 Kynar® is a registered trademark of ARKEMA,
Inc.
|